SDLT tape format like the DLT-IV backup tape technology utilizes the signal processing of PRML (Partial Response Maximum Likelihood) for playback and data recording. The technology of PRML boosts the recording density and sturdiness of Super DLT tape media format.

DLT (digital linear tape) backup tape products have an added measure of safety as data is verified after write command by performing a read.  In case if an error is detected in data rerecording, then the data is further rerecorded…

AIT tape technology exhibits more than 50 years of technical experience and innovative capabilities of Sony Electronics in providing recording solutions that effectively meet customer’s requirements.

Sony AIT2 WORM tape drive supports both standard and WORM AIT tape media as it is a multi-function AIT drive. Sony AIT-3 belongs to the third version of AIT data tape technology whose performance and recording capacity has been doubled…

As the customers are deploying the HSM systems and increased online applications, the demand is increasing rapidly for the secondary storage devices to perform even more higher. The success factor for the enterprises

The flexible architecture of MIC and drive firmware was used to modify the AIT-2 tape drive for giving it a new feature of recording and extra level of protection to the data. The WORM feature of the AIT2 tape technology…

The DLT data cartridges measure approx. 4×4 inches and 1 inch thick. The tape cartridge has the supply reel of tape and take up reel is in the drive. The DLT tape cartridge has a switch called the “write protect”…

The Symmetric Phase Recording head of the DLT tape drive uses an alternating angel for writing adjacent tracks.Therefore, the “guard bands” are not needed because the cross track interference is eliminated by the SPR. So, the widths of the track…