All Posts

Numerous breakthrough technological advancements enable the VXA backup tape format to offer unmatchable reliability, efficiency and performance. The most important thing is that all these features are provided by the VXA tape technology at low operational costs.

Sony LTO-4 tape format has been improved as new A3MP technology has been added to the tape cartridge. The tape of the Sony LTO4 is flange shaped so that the tape edges could be safeguarded. The Sony LTO-4 cartridge also…

SDLT tape format like the DLT-IV backup tape technology utilizes the signal processing of PRML (Partial Response Maximum Likelihood) for playback and data recording. The technology of PRML boosts the recording density and sturdiness of Super DLT tape media format.

DLT (digital linear tape) backup tape products have an added measure of safety as data is verified after write command by performing a read.  In case if an error is detected in data rerecording, then the data is further rerecorded…

The SDLT tape drives utilize the highly effective PRML channel. PRML stands for “Partial Response Maximum Likelihood” and it was introduced by Lucent technologies and Quantum together. So this technology in SDLT tape format improves the data transfer rate, recording…

As the customers are deploying the HSM systems and increased online applications, the demand is increasing rapidly for the secondary storage devices to perform even more higher. The success factor for the enterprises

The DLT data cartridges measure approx. 4×4 inches and 1 inch thick. The tape cartridge has the supply reel of tape and take up reel is in the drive. The DLT tape cartridge has a switch called the “write protect”…

The preservation and the recording of critical data & information are important for the enterprises nowadays. It was the year 1994 when the DLT technology came into the market and it was pioneer to introduce the digital tape media that…

The Symmetric Phase Recording head of the DLT tape drive uses an alternating angel for writing adjacent tracks.Therefore, the “guard bands” are not needed because the cross track interference is eliminated by the SPR. So, the widths of the track…